Holmes HAP9412 Air Cleaner User Manual


 
IMPORTANT SAFEGUARDS
FEATURES
HIGH, MEDIUM AND LOW SPEED SETTINGS
For optimum air filtration, operate your Holmes
®
air
purifier continuously on the MEDIUM (2) setting. Its
rugged motor has been designed to give many years of
use. For quieter operation (such as in a bedroom), select
the LOW (1) setting. When high levels of air pollution are
present, select the HIGH (3) setting to quickly circulate
and filter the room air.
FILTER CHECK INDICATOR
The filter indicator light eliminates guesswork by letting
you know when it is time to replace the filters.
BEFORE USE
1. Carefully unpack your Air Purifier. Select a firm level
place where there are no obstructions to the air inlet
or filtered air outlet.
2. Remove the air inlet grill and check if the filter is
covered by a plastic bag. If it is, remove plastic bag
before use and place filters into unit. Reinstall the air
inlet grill.
3. DO NOT POINT FILTERED AIR OUTLET TOWARDS WALL.
OPERATING INSTRUCTIONS
1. Plug into a 120V AC electrical outlet. The Filter Check
Indicator light will blink three times to indicate that
the feature has been activated.
2. Select the desired operating speed; HI (3), MEDIUM
(2), LOW (1), by turning Speed Control Knob to the
appropriate setting. For optimum air filtration, it is
recommended to operate the air purifier
continuously. Its rugged motor has been designed to
give many years of use.
3. To release negative ions into the filtered air, press the
ionizer button ( ) to ON and the outer ring of the
button will illuminate in blue.
NOTE: The ionizer will not work unless the unit is
running.
CORD SAFETY
The length of cord used on this appliance was
selected to reduce tangling or tripping hazards.
If a longer cord is necessary, an approved extension
cord may be used. The electrical rating of the
extension cord must be equal to or greater than the
electrical rating of the air purifier (see rating label
marked on product).
Care must be taken to arrange the extension cord so
that it will not drape over the countertop or tabletop
where it can be pulled on by children or accidentally
tripped over.
GET TO KNOW YOUR AIR PURIFIER
Your Holmes
®
air purifier features a HEPA-Type filter that
removes up to 99% of airborne dust and pollen as small
as 2 microns, and helps reduce smoke, mold spores and
pet dander from air passing through the filter.
Arm & Hammer
®
baking soda and carbon help
absorb and eliminate household odors.
Optional ionizer naturally improves performance and
helps freshen the air.
IONIZER
This appliance has an optional ionizer feature which,
when turned on, releases negative ions into outgoing
filtered air to help the air purification process.
What Are Ions?
Ions are tiny particles that carry a positive or negative
charge. They exist naturally around us: in the air, water,
and ground. Both positive and negative ions are colorless,
odorless, and harmless.
How Does The Ionizer Work?
Negative ions help air purification by attaching
themselves to very small airborne particles in the room.
These particles take on a negative charge and may join
with positively charged particles such as dust, pollen,
smoke, and pet dander to form larger particles. These
larger particles are then more easily captured by the
filter system.
Important Notes:
Your ionizer may produce an occasional popping or
cracking sound. This is normal and occurs when a small
buildup of ions is discharged.
After extended use, you may notice dust around the grills
or front panel. This is caused by negative ions exiting the
air outlet, evidence of the ionizer’s air cleaning
effectiveness. You can remove the dust with a soft brush
or clean, damp cloth.
Larger particles may be attracted to positively charged
surfaces throughout the home, like walls or floors.
This may occur more frequently when the filter is
nearing the end of its useful product life and unable
to capture as many charged particles.
Excessive amounts of pet dander, dust, or smoke may
decrease the life expectancy of the filter and
interfere with the ionization process.
To help prevent particles from attracting to surfaces
throughout your home:
You may want to run the ionizer less often.
Check the condition of the filter more frequently.
CAUTION: The ionizer in this appliance produces less
ozone than the UL* established limits of 50ppb. However,
in high concentrations, ozone can be harmful to birds and
small pets. To prevent ozone buildup, we suggest using
the ionizer in well ventilated areas with the air purifier
fan on.
HEPA-TYPE FILTER
HEPA (High Efficiency Particulate Air) filters are designed
to remove up to 99% of airborne pollutants, at 2 microns
or larger, from the air that passes through them. These
include tobacco smoke, household dust, pet dander and
pollen.
*Tested and listed by the Underwriters Laboratories, Inc.
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons. These precautions include:
1. Read all instructions before using the appliance.
2. To avoid fire or shock hazard, plug the appliance
directly into a 120V AC electrical outlet.
3. If the filter is covered by a bag when shipped,
remove plastic bag before use.
4. Keep the cord out of heavy traffic areas. To avoid
fire hazard, NEVER put the cord under rugs, near
heat registers, radiators, stoves, or heaters.
5. To protect against electrical hazards, DO NOT
immerse the appliance in water or other liquids. Do
not use near water.
6. Close supervision is necessary when any appliance is
used by or near children, or disabled persons.
7. Always unplug the air purifier before moving or
cleaning the unit, opening the grill, changing the
filters and whenever the unit is not in use. To
disconnect the unit, be sure to pull the plug and not
the cord.
8. NEVER drop or insert any objects into the openings of
the unit.
9. DO NOT operate any appliance with a damaged cord
or plug. If the motor fan fails to operate or the unit
has been dropped or damaged in any manner, return
appliance to manufacturer for examination and/or
repair.
10. Use appliance only for intended household use as
described in this manual. Any other use not
recommended by the manufacturer may cause fire,
electric shock, or injury to persons. The use of
attachments not recommended or sold by Jarden
Consumer Solutions may cause hazards.
11. DO NOT use outdoors.
12. NEVER place on a soft surface such as a bed or sofa
as this could cause the unit to tip over and block the
air inlet or outlet grills.
13.
Keep unit away from heated surfaces and open flames.
14. DO NOT attempt to repair or adjust any electrical or
mechanical functions on this unit. Doing so will void
your warranty. The inside of the unit contains no user
serviceable parts. All servicing should be performed
by Jarden Consumer Solutions or an authorized
Jarden Consumer Solutions Center.
15. DO NOT place anything on top of unit.
16. NEVER use detergents, gasoline, glass purifier,
furniture polish, paint thinner, or other household
solvents to clean any part of the appliance.
17. Always turn the appliance off before unplugging it.
18.
The ionizer in this appliance produces less ozone than
the UL established limits of 50ppb. However, in high
concentrations, ozone can be harmful to birds and
small pets. To prevent ozone buildup, we suggest using
the ionizer in well ventilated areas with the fan on.
19. This appliance should only be used in a room with
temperatures between 40° F and 110° F.
20. WARNING: To reduce the risk of fire or electric
shock, DO NOT use this appliance with any solid-state
speed control device.
PLEASE READ AND SAVE
THESE IMPORTANT
SAFETY INSTRUCTIONS
FEATURES - OPERATIONS
CLEANING/MAINTENANCE
FILTER REPLACEMENT
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
CLEANING/MAINTENANCE
INSTRUCTIONS
1. Turn the air purifier off and unplug it before
cleaning.
2. The outside of the air purifier can be cleaned with a
soft, clean dampened cloth.
3. The air inlet grill (reference Figure 1) can be
removed and washed in warm soapy water (not
dishwasher safe). Dry before replacing in the unit.
4. The filtered air outlet can be cleaned of dust with a
small, soft brush.
5. If you wish to clean the inside of the air purifier,
please only use a dry, soft cloth to wipe it down.
WARNING: Do not allow moisture to come in
contact with the main housing of the air purifier.
FILTER REPLACEMENT INSTRUCTIONS
IMPORTANT:
DO NOT attempt to wash and re-use the HEPA-type
filter.
If the filters are enclosed in plastic bags, remove
them before use.
NOTE:
Every few weeks, check the condition of filters. Filter life
will vary, depending on air quality and usage. Under
normal conditions of continuous use, the HEPA-type filter
will operate efficiently for 3-6 months.
After approximately 4 months of operation, the Filter
Check Indicator will light up to alert you to replace filters
before further use.
To replace your filter:
1. Turn off and unplug the air purifier.
2. Open the air inlet grill and examine the black foam
prefilter. Remove any dust or lint, and wash in warm
soapy water. Rinse, drip dry, and place back into grill
inlet.
3. Remove HEPA-type filter from the unit by pulling it
gently towards you and discard it. DO NOT attempt to
clean the old HEPA-type filter.
4. Install the new HAPF30 HEPA-type filter into the unit.
This model utilizes a hang tab and filter clips to
insure that the filter is properly in place. Before
replacing the filter,
make sure that the
hang tab is securely in
place. The clip can only
be attached to the tabs
on the filter one way.
The filter clip should
easily slide onto the
filter hang tab with
only a small amount
of pressure. DO NOT
use force while
attaching the clip to the
filter. (Fig. 2)
5. Align the clip on the
side of HEPA-type filter
with rails on the inside
of the purifier unit. Gently slide the filter onto the
rail. (Fig. 3)
6. Replace air inlet grill.
7. To reset the Filter Check Indicator, press and hold the
button for 3 seconds. The Indicator light will blink
three times and turn off.
Filters can be purchased at a retailer near you, online at www.holmesproducts.com, or by calling 1-800-546-5637.
Air Purifier
Model Number
Filter Quantity
Needed
Filter Model
Number
Filter
Description
HAP9240/HAP9412 1
HAPF30
A Filter
HEPA-type Filter
HAP9424 2
HAPF30
A Filter
HEPA-type Filter
Fig. 3
Fig. 2
Fig. 1
A. Control Panel
B. Speed Control Knob
C. Filter Reset Button
D. Filter Check
Indicator Light
E. Ionizer Button
F. Filtered Air Outlet
G. HEPA-Type Filter
H. Washable Foam
Pre-Filter
I. Air Inlet Grill
B
A
E
C
D
F
G
H
I
F
G
H
I
I
F
H
G
HOL A HAP9240_HAP9412_HAP9424 MANUAL_10EM2.indd 2HOL A HAP9240_HAP9412_HAP9424 MANUAL_10EM2.indd 2 1/21/10 3:01:06 PM1/21/10 3:01:06 PM