Filter
Top Products
1. Plug the power cable into the mains power.
2. Turn the cleaner on by pressing the on/
off button to on setting. The red power
indicator light will illuminate. It will take
approximately 10 minutes to reach the
correct temperature.
3. When the correct temperature has been
reached, the green thermostat indicator
light will illuminate. The cleaner is now
ready for use. The green thermostat
indicator light will cycle on and off during
operation to show that the cleaner is
maintaining the correct temperature.
4. Ensure the trigger lock button is off.
Push the lock from the left side to lock the
trigger and push from the right to release
the lock.
5. Press the steam trigger and steam will
be emitted from the nozzle.
Note: Initial emissions of steam can
contain water condensation droplets, it is
recommended that the first few seconds
of steam be directed onto an old cloth.
Instructions for Use (continued)
Operating the cleaner
Note: Ensure that the boiler has already been fill d and that all desired accessories are
connected, before commencing.
11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 12 25/08/11 4:49 PM