Filter
Top Products
Model CF-941
3-5. CLEANING 1. Move the POWER switch to the OFF position.
2. Disconnect the electrical supply to the unit.
To avoid burns, allow the unit to cool before
cleaning by opening all the drawers fully for
approximately 20 minutes.
3. Remove drawers by pulling straight out and tilting up.
4. Clean drawers with a cloth and soapy water.
5. Remove drip tray from the bottom of the drawer and
clean it.
6. Clean the interior of the cabinet thoroughly with a
cloth and soapy water.
Do not use steel wool, other abrasive cleaners or
cleaners/sanitizers containing chlorine, bromine,
iodine or ammonia chemicals, as these will
deteriorate the stainless steel material and shorten
the life of the unit.
Do not spray the unit with water, such as, with
a garden hose. Failure to follow this caution could
cause component failure.
7. Wipe down the exterior of the cabinet with a damp
cloth. Avoid getting water in the area of the control
panel.
8. Replace the drip tray and drawer.
9. If the unit is to be left off, leave the drawer open two
or three inches.
203 3-3