Hellenbrand TN2 Series Water System User Manual


  Open as PDF
of 4
 
TN2 Capacity Ratings
TN2 Physical Specications
TN2 Dimensions
OPERATING CONDITIONS
1. Water Pressure 30 - 100 psi.
2.Watertemperatureisnottoexceed110ºFandtheunitcannotbesubjecttofreezingconditions.Consultfactoryforhigherwatertemperatureapplication.
3.Limitof2ppmofferrousiron.Add3grainspergallonofhardnessforeachppmofironpresent.
4.Flexconnectorsandvacuumbreakersarerequiredforcertainsizesystemsand/orapplications.Consultfactoryfordetails.
5.Backwashowratesarecalculatedat4gpmpersq.ft.ofbedareaandroundedoffbasedon50ºFwatertemperature.
6.RefertoHellenbrandBulletin2050“FlowRatesandSoftWaterQuality(HardnessLeakage)ifyourapplicationrequiresthatlevelsofhardnessleakagedonotexceed“x”.
Product improvement designs are subject to change without notice.
HELLENBRAND, INC.
1-800-626-1417
www.hellenbrand.com
106611
6/05- 1000
Updated 1/09-LBRY
DEALER NAME:
*Allow an additional 12” for resin loading. All dimensions are ± 1” and are
subject to change without notice.
SYSTEM IN/OUT WIDTH WIDTH
HEIGHT* HEIGHT* SINGLE TWIN
MODEL (INCHES) (INCHES) INCHES INCHES
TN2-60 68 57.5 34 50
TN2-90 78.5 68 35 52
TN2-120 79 68 43 62
TN2-150-18 80.5 70 45 66
TN2-150-21 80.5 70 49 74
TN2-180-18 80.5 70 45 66
TN2-180-21 80.5 70 49 74
TN2-210 80.5 70 49 74
TN2-240 88 77.5 51 78
TN2-270 88 77.5 57 84
TN2-300-24 88 77.5 57 84
TN2-300-30 91 80.5 63 96
TN2-450 91 80.5 72 105
TN2-600 91.5 81 78 117
RECOMMENDED APPROXIMATE WATER
MINERAL BRINE DRY SHIPPING WEIGHT METER
TANK TANK SALT POUNDS SIZE
MODEL (INCHES) (INCHES) STORAGE LBS SINGLE TWIN RECOMM.
TN2-60 13x54 18x40 330 265 490 1”or1-1/2”
TN2-90 14x65 18x40 300 320 600 1”or1-1/2”
TN2-120 16x65 24x41 640 425 810 1-1/2”or2”
TN2-150-18 18x65 24x50 750 525 1005 1-1/2”or2”
TN2-150-21 21x62 24x50 750 555 1065 1-1/2”or2”
TN2-180-18 18x65 24x50 750 580 1115 1-1/2”or2”
TN2-180-21 21x62 24x50 750 610 1175 1-1/2”or2”
TN2-210 21x62 24x50 710 665 1280 1-1/2”or2”
TN2-240 24x72 24x50 680 775 1505 2”
TN2-270 24x72 30x50 1110 830 1615 2”
TN2-300 24x72 30x50 1110 880 1715 2”
TN2-300-30 30x72 30x50 1110 1035 2025 2”
TN2-450 30x72 39x48 2080 1360 2835 2”
TN2-600 36x72 39x48 1640 1825 3920 2”
RATED CAPACITY CONT. PEAK BKW
RESIN LOW SALT MEDIUM SALT HIGH SALT GPM GPM RATE
MODEL CU.FT. GRAINS @ LBS. GRAINS @ LBS. GRAINS @ LBS. 15 PSI 25 PSI GPM
TN2-60 2 38,000 @ 12 56,000 @ 20 64,000 @ 30 40 56 3.5
TN2-90 3 57,000 @ 18 84,000 @ 30 96,000 @ 45 39 54 4.0
TN2-120 4 76,000 @ 24 112,000 @ 40 128,000 @ 60 47 64 5.0
TN2-150-18 5 95,000 @ 30 140,000 @ 50 160,000 @ 75 51 68 7.0
TN2-150-21 5 95,000 @ 30 140,000 @ 50 160,000 @ 75 67 85 9.0
TN2-180-18 6 114,000 @ 36 168,000 @ 60 192,000 @ 90 50 67 7.0
TN2-180-21 6 114,000 @ 36 168,000 @ 60 192,000 @ 90 63 81 9.0
TN2-210 7 133,000 @ 42 196,000 @ 70 224,000 @ 105 60 77 9.0
TN2-240 8 152,000 @ 48 224,000 @ 80 256,000 @ 120 74 97 12.0
TN2-270 9 171,000 @ 54 252,000 @ 90 288,000 @ 135 71 94 12.0
TN2-300 10 190,000 @ 60 280,000 @ 100 320,000 @ 150 68 91 12.0
TN2-300-30 10 190,000 @ 60 280,000 @ 100 320,000 @ 150 84 105 20.0
TN2-450 15 285,000 @ 90 420,000 @ 150 480,000 @ 225 84 105 20.0
TN2-600 20 380,000 @ 120 560,000 @ 200 640,000 @ 300 87 110 25.0
 previous