Filter
Top Products
Dated receipt required for warranty replacement.
FEATURES
• Automatically comes on when motion is detected.
• Automatically turns light off.
• Photocell keeps the light off during daylight
hours.
REQUIREMENTS
• The light control requires 120 volts AC.
• If you want to use Manual Override mode, the
control must be wired through a switch.
NOTICE: Not to be used on light dimmer or timer-
controlled circuits.
• Some electrical codes require installation by a
qualified electrician.
UNPACKING
Be sure to remove all contents from packaging and
verify all items are present before assembling this light
fixture. This package includes the following items:
• Lantern
• Three LED light bulbs
• Universal mounting bracket (X-Bar)
• Mounting hardware
• Wire nuts
• Owner’s Manual
© 2008 598-1338-01
Motion Sensing
Diecast Metal Lantern
INSTALLATION
For best performance, mount the fixture about 6 feet
(1.8 m) above the ground.
1. Remove two decorative nuts.
2. Remove X-Bar.
3. Tighten mounting screws on X-Bar finger tight.
4. Attach X-Bar to junction box.
Junction Box
X-Bar
Decorative Nut
Lantern Base
Lantern Mounting
Screw
X-Bar
Bracket Mounting
Screw
Note: We recommend having an assistant help hold
the lantern assembly during the wiring process.