Heath Zenith Lighted Wireless Push Button Accessory Indoor Furnishings User Manual


 
-4-
598-1137-02
Tune Settings
Your Heath
®
/Zenith wireless chime has different selectable tunes: Ding
(one note), Ding-Dong (two note), or Westminster (eight note) (Available
on selected Heath
®
/Zenith chimes). The factory setting is for the Ding-
Dong tune (or Westminster, when available). This tune can be changed
by following the instructions below.
Ding (one note tune)
Push button: Add a jumper to location 8.
Ding-Dong (two note tune)
Push button: Remove jumper from location 8.
Chime: Remove jumper from location 8.
Westminster (Eight note tune) (Available on selected Heath
®
/Zenith
chimes)
Push button: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. You may
purchase any Heath
®
/Zenith wireless push button for a second entrance.
We recommend the back door use the Ding tune and the front door
use the Ding-Dong tune (or Westminster tune, available on selected
Heath
®
/Zenith chimes). Models that include two push buttons will come
factory set for front and back doors. Decals on the rear of the push button
will indicate its setting.