Heath Zenith 6280 Series Door User Manual


  Open as PDF
of 28
 
-3-
595-5506-12
ChimewithSeparateDecorativeCover:
Thechimebasecanbemountedintwodifferentways.Thebasecanbemounted
usingthekeyholesorthethreemountingholes.Thebasemaybemountedhori-
zontallyorverticallydependinguponthespecicmodelpurchased.
KeyholeMounting:
• Usetemplateonbackcoverofmanualforscrewplacement.Note: Make
sureholesarelevelbeforedrilling.
• Drilltwo7/32"diameterpilotholesforwallanchorsandinsertanchors.
• Mountkeyholescrewstowallleavingabout1/8"(3mm)ofthescrewthreads
exposed(seeFigure5).
•
Usingkeyholesonbackofchimebase,hangbaseonscrews.
• Placechimecoverovertab(s)ontopofchimebase.
ScrewMounting:
• Removebatteriesfromchime.
• Placechimeagainstwallandverifythechimeislevel.
• Usechimeholesasatemplate(seeFigure6).Drillthree7/32"diameterpilot
holesforwallanchors(provided)andinsertanchors.
• Insert3screws(provided)throughholesinbackofchime.
• Verifychimeislevelandtightenscrewssecurely.
• Replacebatteries(seeFigure2).
• Placechimecoverovertab(s)ontopofchimebase.
Figure 5 - Back of Chime Figure 6 - Inside Chime
Keyhole Slots
(Horizontal Mounting)
Keyhole Slots
(Vertical Mounting)
Cover Hanging
Tabs
Keyhole
Screw(x2)
ScrewMounting
Holes
Note:Chimeshown
mountedvertically.
Note:Chimeshown
mountedhorizontally.
 previous next