Heath Zenith 6180 Series Door User Manual


  Open as PDF
of 28
 
-6-
595-5506-12
3. Tochangethecode,either(Formodelswith2pushbuttons,changecode
settinginbothpushbuttonstomatchchime.):
• Addajumpertothesamelocationonboththepushbuttonandthechime
or...
• Removeajumperfromthesamelocationonboththepushbuttonandthe
chime or...
• Moveajumperonthepushbuttonfromonelocationtoanother.Movethe
correspondingjumperonthechimetomatchthenewlocationinthepush
button.
Example:Movejumperatlocation“5”tolocation“4”onboththepush
buttonandthechime.
Note:Codepositions1through7mustbeexactlythesameforboththe
pushbuttonandchimeforthissystemtofunction.
Note:Unitwillcomefactorysetwithjumpersinlocations5,6,and7onthe
pushbuttonandonthechime(seeFigure8).
Therangeofthewirelesschimecanvarywithlocation,temperature,and
batterycondition.
Battery
Battery
Battery
C
h
i
m
e
V
o
l
u
m
e
12345678
*CodeSettings 1-7
Must Match Both Push
Button and Chime
Inside Push
Button
Inside Chime
Note: Some models might require the use of
tweezerstoremoveandreplacethejumpers.
Figure 8
12345678
 previous next