Filter
Top Products
© 2003 DESA Specialty Products™ 595-5506-09
This package includes (Style of push button and chime may vary from illus-
trations):
• Wireless chime
• Wireless push button w/battery
• Hardware pack
You'll need to buy 3 "D" alkaline batteries for the chime (Clock chime
models require additional "AA" battery). In typical use, alkaline batteries
will last up to three years.
3. Test range. Temporarily posi-
tion chime and push button
where you want them mounted.
Press push button to verify
chime and push button work
properly. If chime does not
sound, see Troubleshooting.
6180 Series and 6280 Series
Decorative Wireless Chime
Case Style "A" (Shown
In Vertical Position)
2.Install 3 alkaline "D" batter-
ies. Make sure batteries are
oriented properly.
The base may be mounted in a
vertical or horizontal position.
The correct mounting position
will depend upon the specific
cover (model).
Cover
Mounting
Tabs
1.Install alkaline type A23 12 volt push button bat-
tery. Remove back of case by pushing in tab on
bottom with a small screwdriver. Make sure battery
is oriented properly (see page 4).
1
2
3
4
5
6
7
8
-
+
-
+
-
+
Battery
Battery
Battery
Chime
Volume
Jumpers
Case Style "B"
Jumpers
Chime
Volume