Heath Zenith 6144 Door User Manual


  Open as PDF
of 24
 
© 2008 HeathCo LLC 598-1143-02
Wireless Strobe
Chime
DANGER: Electric shock hazard. Do not open chime. No serviceable
components inside. If strobe fails to flash, replace chime.
This package includes (Style of push button and
chime may vary from illustration):
• Wirelessstrobechime
• Wirelesspushbuttonwithbattery
• Hardwarepack
1. Install alkaline type A23 12 volt push button
battery (included). Remove back of case by
pushingintabonbottomwithasmallscrew-
driver (see Figure 1). See diagram inside push
button for correct battery orientation. Note:
If batteries are preinstalled, remove orange
battery tab.
2. Plug in wireless chime. To reduce the risk of
electrical shock, this equipment has a polar-
izedplug(onebladeiswiderthantheother).
Thisplugwilltinapolarizedoutletonlyone
way.Iftheplugdoesnottfullyintheoutlet,
reversetheplug.Ifitstilldoesnott,contacta
qualiedelectriciantoinstalltheproperoutlet.
Do not attempt to bypass this safety feature.
3.
Test range. Temporarily position push button
whereyouwantitmounted.Presspushbutton
toverifychimeandpushbuttonworkproperly.If
chime does not sound, see Troubleshooting.
Figure 1
WARNING: To prevent possible SERI-
OUS INJURY or DEATH:
  
batteries.
 
notify doctor.
Model 6144
next