Filter
Top Products
4 598-1282-02
CAUTION: Do NOT connect push
button to mechanical chime if push
button jumper is set for electronic
chime use. Doing so may result in
permanent damage to your chime.
FRONT
TRANS
REAR
DO NOT OIL
Tone Bar
Figure 4 - Inside Typical Mechanical Chime
Plunger
Determine Chime Type
5. Locate your chime and remove the
cover. If you see tone bars and plungers
you have a mechanical chime (see
Figure 4). If not, you have an electronic
chime.
6. If you have a mechanical chime, go to
the
Troubleshooting section, page 7. If
you have an electronic chime proceed
to step 7 on page 5.