Heath Zenith 598-1165-03 Home Safety Product User Manual


 
Features
• Light comes on when motion is detected.
• Automatically turns light off.
• Photocell keeps the light off during daylight
hours.
© 2006 DESA Specialty Products™ 598-1165-03
ON-TIME
TEST 1 5 10 MIN
Set ON-TIME switch to 1,
5, or 10 minutes.
ON-TIME
Set the ON-TIME switch
on the bottom of the cover
plate to TEST.
ON-TIME Switch at 1, 5,
or 10 minutes
... back on.
1 Second
OFF
then...
Manual mode only works at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.
Mode Switching Summary
Flip light switch
off for one second
then back on*
* If you get confused while switching modes,
turn the power off for one minute, then back
on. After the calibration time the control will
be in the AUTO mode.
MANUAL MODE
AUTO
TEST
Note: When first turned on wait about 1
1
/
2
minutes for the circuitry to calibrate.
Requirements
• The Light Control requires 120 volts AC.
• If you want to use Manual Mode, the control
must be wired through a switch.
Some electrical codes require installa-
tion by a qualified electrician.
MANUAL MODE
AUTO
TEST 1 5 10 MIN
* resets to Auto Mode at dawn.
OPERATION
TEST
Motion Sensing Coach
Lights
This package includes:
• Lantern
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Connectors
• Some Models Include an Optional Decora-
tive Tail Assembly
Before installation, record the model
number from back of fixture below.
Attach receipt in case of possible war-
ranty issues.
Mode: On-Time Works: Day Night
Test
5 Seconds
x x
Auto
1, 5, or 10 Min x
Manual
To Dawn* x