Heath Zenith 3003530 Door User Manual


 
-4- 598-1073-03
12345678
12345678
Inside
Sensor
Remove screw to
open access door
Back of Chime
Tune Setting
Tune Setting (Not
used on all models)
Note: Some models might require
the use of tweezers to remove and
replace the jumpers.
Tune Settings
Your wireless chime has different selectable tunes: Ding (one note), Ding-Dong
(two note), or Westminster (eight note) (Available on selected chimes). The
factory setting is for the Ding-Dong tune (or Westminster, when available). This
tune can be changed by following the instructions below.
Ding (one note tune)
Sensor: Add a jumper to location 8.
Ding-Dong (two note tune)
Sensor: Remove jumper from location 8.
Chime: Remove jumper from location 8.
Westminster (Eight note tune) (Available on selected chimes)
Sensor: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. You may
purchase any ACE
®
wireless push button for a second entrance.