Heatcraft Refrigeration Products CC-HTSTB Fan User Manual


 
4
Options
Electrical options: Outdoor Indoor Stock
Adjustable low pressure control for medium temp. comp. Option Option N/A
Air or electric defrost timer only Option Option 1/2-3 HP low temp.
Beacon II™ Option N/A N/A
Crankcase heater Standard N/A Standard
Dual pressure control (not available on Beacon II™) Option Option N/A
Electric defrost with timer & contactors (040-060 models only) Option Option 4-6 HP low temp.
Fixed fan cycling — pressure or temperature (2 fan units)
(Pressure standard on Beacon II™)
Option Option N/A
Fused disconnect / Non-fused disconnect Option Shipped loose N/A
Phase loss / low voltage monitor Option Option N/A
Smart Defrost Kit™ (Factory-Installed) Option Option N/A
Variable speed EC (VSEC) motors with Orbus™ controller Option N/A N/A
Mechanical options:
12" Extended legs for snowbelt operation Shipped loose Shipped loose Shipped loose
Head pressure control ooding valve Standard Option Standard
Liquid line drier, sight glass Option Option Standard
Liquid line solenoid valve and pumpdown switch Option Option N/A
Low ambient kit with heated and insulated receiver, TD relay Option N/A N/A
Oil separator with discharge line check valve (D cabinet) Option Option N/A
Oversize receiver (D cabinet) Option Option N/A
Precharged refrigerant with quick connect ttings Option Option N/A
Replaceable core liquid line lter (D cabinet) Option Option N/A
Replaceable core suction line lter (D cabinet) Option Option N/A
Suction accumulator Option Option N/A
Suction line lter Option Option N/A
The Beacon II™ Refrigeration System is a preassembled, factory installed refrigeration
system featuring an integrated microcomputer based electronic control board.
The Beacon II™ Refrigeration System replaces the expansion valve, solenoid valve, room
thermostat, defrost control and timer. It comes factory preset thereby eliminating all
of the expensive and time consuming ne tuning and adjustments necessary for a good system installation. For
additional information, contact your Sales Representative.
E Solutions branded products and options are designed to exceed current energy and environmental
standards. It is our commitment in environmental innovation to dedicate ourselves by delivering
energy ecient eco-conscious choices. Products included in the E Solutions portfolio reduce costs,
improve bottom lines, and enhance equipment performance and service life.
The Beacon II™ Refrigeration System with Smart Defrost, factory-installed Smart Defrost Kit™ and
Variable Speed EC (VSEC) motor with Orbus controller are E Solutions options that will optimize
your savings and increase energy eciency.