Filter
Top Products
3
Features & Benefits
Cabinet
Schrader valve provided for suction pressure measurement
External equalizer connection
Heavy-guage textured aluminum cabinet
All electrical components factory wired to terminal board
and identified, making it easy to field wire the unit
Sweat connections to reduce potential for leaks
Internal panels are isolated for quiet operation
Liquid line solenoid wire harness is factory-installed for
quick installation
•
•
•
•
•
•
•
Drain Pan
Front hinged drain pan for easy access
Large diameter drain fitting (3/4" ID)
•
•
Motors
Motors plug into wiring harness for easier servicing
Single phase EC motors available factory-installed or as
a drop-in replacement through InterLink™ Commercial
Refrigeration Parts in 115 and 208-230 voltages
Thermally protected, lifetime-lubricated single phase
PSC motors
•
•
•
Coil
Patented Thermo-Flex™ coil design allows the coil to
“flex” during periods of defrost resulting in expansion of
the coil surface. By eliminating the possibility of wear at
critical stress areas, the integrity and longevity of the unit
are dramatically increased (Patent Number 5,584,340)
Coil heater slots have been enlarged for easier
installation and replacement
Electric defrost models have fixed defrost termination /
fan delay and heater limit thermostats
Reliable nickel steel alloy defrost heater elements
Heaters are coil face mounted for easy access
•
•
•
•
•
Options
Totally enclosed single phase PSC motors available as an option for 208-230 and 460 voltages
Unit Configurations: mounted components, pre-assembled, pre-charged and Beacon II™
- Units available with mounted TXV and mounted TXV / solenoid valve
- Pre-assembled units come with mounted TXV, liquid line solenoid valve and room thermostat
- Pre-charged units come with mounted TXV, liquid line solenoid valve, room thermostat and quick connect fittings
(limited availability)
- Room thermostat option mounted on the back of unit
- Beacon II units come with electronic expansion valves, pressure transducer, temperature sensors and Beacon control board
Most models available with glycol circuiting (see glycol product brochure)
Units available with stainless steel housing and drain pan
Units available with copper fins. Air defrost units also available with polyester coated fins or various coil coatings options
Units available with insulated drain pan
Ship-loose air sock collar available
Wire fan guards for air diffusion
Adjustable defrost termination / fan delay thermostat
•
•
•
•
•
•
•
•
•
Bohn oers a ve-year limited guarantee against leaks at tube sheets and center supports for all medium prole unit coolers
Factory-installed liquid line
solenoid wiring harness for
faster installation
Innovative Thermo-Flex™ coil