Filter
Top Products
MC Series
The advanced, single-inlet cooler that offers:
Colder air than conventional aspen-pad coolers.
The original MasterCool pad can save up to 75% off
the cost of traditional air conditioning.
MASTERCOOL
®
ADVANTAGES
1. 10-Year Limited Warranty against leakage due to rust-out of the cabinet.
2. The MasterCool Motor has all-copper windings for increased reliability and longer life, and is
backed by a 2-year warranty. Most are sold separately to allow a choice of horsepower.
3. High-Capacity Pumps are thermally protected, grounded and U.L. Recognized.
Upgraded with our new, tough electric motor and a 2-year warranty.
4. MasterCool
®
Pad for long life and consistent efficiency. 8" thick on MC
Series and 12" thick on High performance HC Series. Unique
design for easier cleaning and longer life. 5-year structural warranty.
5. Dry Module keeps blower and motor dry and away from the water
and air cooling section.
6. Low Profile is up to one foot shorter than conventional coolers.
7. Dynamically Balanced Blower Wheel with positive locking system
for long and quiet performance.
8. POLYBOND Finish that combines the corrosive protection and ease of
cleaning of plastic with the strength of steel.
9. Junction Box for easy plug-in of either 120V or 240V motors and pumps.
10. High Capacity Water Distribution System assures even wetting of the pad for
maximum efficiency. Field proven for over 10 years.
L900790A March 2007
Specifications
Select your model and horsepower from the chart on the left,
then select the correct MasterCool motor below.
The world leader in evaporative cooling technology, AdobeAir, Inc. is continually involved in the process of product
improvement. AdobeAir, Inc. therefore reserves the right to change specifications and/or design without prior notice. To
obtain the most current product information and/or specifications, visit the AdobeAir, Inc. web site at www.AdobeAir.com.
1450 E. Grant Street
Phoenix, Arizona 85034
877-595-EVAP (3827)
*Industry Standard rating represents a numerical index for use in comparing units
of different manufactureres.
MC43, HC43, MC63, and HC63 are down discharge.
MC44, HC44, MC64, and HC64 are side discharge.
Model Motor Motor Cabinet Duct Shipping Operating Industry
Number
HP Kit H W D Opening Weight Weight Std. CFM
Rating*
MasterCool - MC Series
MC43/44
1
⁄2 971J 27
1
⁄4 42 43 17
3
⁄4 x 17
3
⁄4 135 185 4200
MC43/44
3
⁄4 972J 27
1
⁄4 42 43 17
3
⁄4 x 17
3
⁄4 135 185 4800
MC63/64
3
⁄4 972J 32
1
⁄4 42 43 19
3
⁄4 x 19
3
⁄4 190 250 5500
MC63/64 1 940J 32
1
⁄4 42 43 19
3
⁄4 x 19
3
⁄4 190 250 6500
MasterCool High Performance - HC Series
HC43/44
1
⁄2 971J 27
1
⁄4 42 47 17
3
⁄4 x 17
3
⁄4 150 215 4200
HC43/44
3
⁄4 972J 27
1
⁄4 42 47 17
3
⁄4 x 17
3
⁄4 150 215 4800
HC63/64
3
⁄4 972J 32
1
⁄4 42 47 19
3
⁄4 x 19
3
⁄4 210 295 5500
HC63/64 1 940J 32
1
⁄4 42 47 19
3
⁄4 x 19
3
⁄4 210 295 6500
Industry Certified Air Delivery CFM (cubic feet per minute)
Model Motor Motor Standard Inches static pressure w.g. (water guage)
Number HP Kit CFM Rating
0.0 0.1 0.2 0.3 0.4 0.5
8" MC43
1
⁄2 971J 4200 3188 2980 2815 2586 2304 2082
Thick MC44
3
⁄4 972J 4800 3765 2560 3333 3154 2942 2660
Media MC63
3
⁄4 972J 5500 4127 3985 3781 3574 3288 2958
MC64 1 940J 6500 4544 4368 4206 4050 3841 3580
12" HC43
1
⁄2 971J 4200 3080 2128 2582 2330 2244 2150
Thick HC44
3
⁄4 972J 4800 3522 3300 3070 2845 2670 2580
Media HC63
3
⁄4 972J 5500 3994 3860 3646 3285 3049 2910
HC64 1 940J 6500 4395 4277 4111 3865 3502 3342
Kit Includes Motor, Sheave & Cord*
1
⁄2 HP
3
⁄4 HP 1HP
120 Volt Motors 971J 972J 940J
240 Volt Motors 973J 974J 941J
HC Series
All the benefits of the original MasterCool with these added benefits:
Up to 5 degrees colder air.
The 12" thick MasterCool pad is the ideal solution for larger homes,
providing greater cooling capacity and commercial-grade components
for longer life.
*purchase kits separately from coolers