Filter
Top Products
Heat & Glo • SLR-C • 2292-900 Rev. D • 8/1256
D. Decorative Fronts
WARNING! Risk of Fire! A decorative front is required
for this model. DO NOT operate this appliance without a
decorative front in place.
Only doors certifi ed for use with this appliance model may
be used. Contact your dealer for a list of doors that may
be used.
Figure 13.14 Dimensions of Tonic Decorative Front.
TONIC DECORATIVE FRONT
(TN-SLR-**)
MARTINI DECORATIVE FRONT
(MT-SLR-**)
Figure 13.12 Tonic Decorative Front
Figure 13.13 Martini Decorative Front
Inside and Overlap Fit
See Section 13.C.
Overlap Fit Only
See Section 13.C.
The tinted glass on the Martini Decorative Front meets the
tempered glass specifi cations in Section 1.B of this installa-
tion manual.
A
B
D
C
E
F
TONIC FRONT
A
Top of decorative front to bottom of
appliance.
26-3/8 in. 670 mm
B
Bottom of decorative front to bottom of
appliance.
6-7/8 in. 175 mm
C
Inside dimension of decorative front
(width).
39 in. 991 mm
D
Outside dimension of decorative front
(width).
44-1/2 in. 1130 mm
E
Inside dimension decorative front
(height).
12-7/8 in. 327 mm
F
Outside dimension of decorative front
(height).
19-1/2 in. 495 mm
Table 1. Dimensions of Tonic Decorative Front.
Table 1. Dimensions of Tonic Decorative Front.
Figure 13.15. Dimensions of Martini Decorative Front
A
Top of decorative front to
bottom of appliance.
26-3/16 IN. 665 mm
B
Bottom of decorative front to
bottom of appliance.
7-5/16 IN. 185 mm
C
Outside dimension of
decorative front (width).
46-3/16 IN. 1172 mm
D
Outside dimension of
decorative front (height).
18-7/8 IN. 479 mm
A
B
C
D