Filter
Top Products
3Heat & Glo • SL-550 / 750 / 950TV-D • 2053-985 Rev. J • 4/07
- Table of Contents -
Section 1: Listing and Code Approvals
A. Appliance Certifi cation ................................... 4
B. Glass Specifi cations ...................................... 4
C. BTU Specifi cations ........................................ 4
D. High Altitude Installations .............................. 5
E. Non-combustible Materials Specifi cation....... 5
F. Combustible Materials Specifi cation.............. 5
Section 2: Getting Started
A. Design and Installation Considerations ......... 6
B. Negative Pressure ......................................... 7
C. Tools and Supplies Needed ........................... 8
D. Inspect Appliance and Components .............. 8
Section 3: Framing and Clearances
A. Selecting Appliance Location......................... 9
B. Constructing the Appliance Chase .............. 10
C. Clearances .................................................. 10
D. Mantel Projections ........................................11
Section 4: Termination Locations
A. Vent Termination Minimum Clearances ....... 12
Section 5: Vent Information and Diagrams
A. Vent Guidelines ........................................... 13
B. Vent System Confi guration .......................... 13
Section 6: Vent Clearances and Framing
A. Pipe Clearances to Combustibles ............... 15
B. Wall Penetration Framing ............................ 15
C. Vertical Penetration Framing ....................... 15
Section 7: Appliance Preparation
A. Installing Outside Air Kit Damper Assembly ..16
B. Gas/Electrical Connections ......................... 16
C. Securing and Leveling Appliance ................ 17
Section 8: Installing Vent Pipe
A. Assembly of Vent Sections .......................... 18
B. Attaching Vent to Firebox ............................ 18
C. Securing Vent Sections .............................. 18
Section 9: Gas Information
A. Fuel Conversions......................................... 19
B. Gas Pressures ............................................. 19
C. Gas Connection ........................................... 19
Section 10: Electrical Information
A. Recommendation for Wire ........................ 21
B. Connecting to the Appliance ..................... 21
C. Intellifi re Ignition System Wiring ................ 21
D. Standing Pilot Ignition System Wiring ....... 22
E. Junction Box Installation ........................... 23
F. Wall Switch Installation for Fan ................. 23
Section 11: Finishing
A. Mantel Projections .................................... 24
B. Facing Material ......................................... 24
Section 12: Appliance Setup
A. Remove Shipping Materials ...................... 25
B. Remove Grate Shipping Support .............. 25
C. Clean the appliance .................................. 25
D. Accessories .............................................. 25
E. Install the Refractory ................................. 25
F. Lava Rock, Vermiculite, Rockwool
and Ember Placement .............................. 25
G. Positioning the Logs ................................. 26
H. Glass Assembly ........................................ 30
I. Screen Mesh ............................................. 30
J. Grilles and Trim ......................................... 30
K. Hood ......................................................... 30
L. Shutter Settings ........................................ 30
Section 13: Operating Instructions
A. Before Lighting Appliance ......................... 31
B. Check Appliance Draft .............................. 31
B. Lighting Appliance ..................................... 32
C. After Appliance is Lit ................................. 34
D. Frequently Asked Questions ..................... 34
Section 14: Troubleshooting
A. Standing Pilot Ignition System .................. 35
B. Intellifi re Ignition System ........................... 37
Section 15: Maintaining and Servicing Appliance. .......... 39
Section 16: Reference Materials
A. Appliance Dimension Diagram ................. 41
B. Service Parts ............................................ 42
C. Warranty ................................................... 52
D. Contact Information .................................. 53
Î
Î