57
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T, 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev. S • 9/12
D. ElevatedHearthSystems
Use the table below to identify the hearth system that will be used. The table will also help identify effects on the various
dimensions. Some hearth systems will elevate the appliance off the oor at a given dimension. For example, if appliance
will be used with a Kenwood Cabinet with Base, the appliance will be elevated 9-1/4 in. The 9-1/4 in. elevation will also
have to be added to the following: Wall penetration referenced in Figure 8.2 (Wall penetration) and Rough Opening Height
(header height) referenced in Figure 5.2. Note: Finished oor thickness should also be considered when determining in-
stallation dimensions.
Note1.AdddimensionstoWallPenetration(Figure8.2)andRoughOpeningHeight(Figure5.2).
Note2.VerifyMarbleCutLengthsonsitepriortocutting.
Note3.Dimensionsassumeuseofa3/4in.HearthPad.
MODEL DESCRIPTION PART#
ELEVATEDAPPLIANCE
DIMENSION
SeeNote1
MARBLELEGCUT
LENGTH
SeeNote2
6000
Series
KENWOOD CABINET KDC48DBP 0 33 in.
KENWOOD CABINET W/ BASE KDC48DBP W/ HTKDC48DBP 9-1/4 in. 33 in.
KENWOOD CORNER CABINET KDA48DBP 0 33 in.
KENWOOD CORNER CABINET W/ BASE KDA48DBP W/ HTKDA48DBP 9-1/4 in. 33 in.
KENWOOD MANTEL AFKDMPB 0 (See Note 3) 33 in.
KENWOOD MANTEL W/ BASE AFKDMPB W/ HTKDMPB 9-1/4 in. 33 in.
LUNA SURROUND LUNA-36-GY 1-1/16 in. N/A
8000
Series
KENWOOD MANTEL AFKDMPC 0 (See Note 3) 32-7/8 in.
KENWOOD MANTEL W/ BASE AFKDMPC W/ HTKDMPC 9-1/4 in. 32-7/8 in.