Heat Controller VMH12SC-1 Heat Pump User Manual


 
8
Service Manual VMH SERIES Heat Controller, Inc.
7
2. Function
When the power supply is
interrupted and then restored, the
unit automatically restarts at the
previous function setting.
Maintains the room temperature according
to the set temperature
The mode can be change by the room temperature
The louver can be set at the desired position or
swing up and down automatically
The function is usually used in rainy
days in springtime or damp areas
The fan is turned to low speed in both
cooling and heating
The unit will decide the louver direction according
to operation mode
Turbo, high, med, low, breeze
Restart is for approx. 3 minutes
Prevents condensate from freezing on evaporator
by sensing the evaporator pipe temperature
in cooling mode
Room temperature sensor
Pipe temperature sensor
Indoor unit
Operation by remote controller
Sensing room temperature
Room temperature control
Anti-freeze protection in cooling
Time Delay Safety control
Indoor fan speed control
Two-direction air vane
Sleep mode auto control
Independent dehumidification
Air flow Direction control
Auto mode
Temp. Compensation
Auto defrost
Anti-cold function
Self-diag. function
Auto-restart function
Timer function
Ionizer
Prevent the cold wind at the
beginning of unit start.
Self clean
Indoor golden fin
Follow me
Ionizer
Indoor golden n