Heat Controller BG-143G Air Conditioner User Manual


 
TIMER:
Press this button to set the time for unit starting or stopping.
Press or hold the Up () / Down () to set the timer time.
Turning the unit ON or OFF at any time will cancel the Auto Start/Stop function.
CHECK FILTER:
This feature is a reminder to clean the Air Filter for more efficient operation. The “CHECK
FILTER” light will illuminate after 250 hours of operation.
After the filter is cleaned, press this button to confirm that the filter has been cleaned and the
light will go off.
FOLLOW ME (OPTIONAL):
Press the button on the remote controller to activate this feature, which serves as a remote
thermostat allowing for the precise temperature control at its location, rather than using the
thermostat sensor in the unit’s display.
Clean Air (OPTIONAL):
Press this button to start the Clean Air feature, press again to stop.
When this feature is started, the Ionizer is energized to generate abundant anions to fill the
room with refreshing and natural air.
Service Manual
Room Air Conditioner with R-410A
Heat Controller, Inc.
5