Heartland 7200 Stove User Manual


 
6
STOVE
TOP
Bracket
-Remove the nuts, washers and screws located at rear edge of stove top (2 on SWEETHEART,4 on
OVAL) and the 4 machine screws from the stove top.
-With a helper, lift cabinet assembly from box by area that is circled. (See Fig. 1 Page 2).
-Place cabinet assembly onto stove body. (See diagram above).
-Line up holes in the bottom (foot) of the bracket with the stove top holes while one person supports
cabinet, fasten the cabinet brackets to the stove with machine screws (2 each side). (See diagram
above).
-Place box on the floor close to stove. (See Fig. 1 Page 2).
WOOD STOVES ONLY
-Re-insert screws from the inside of the lip at the back of stove through the splashback , then
assemble the nuts and washers to each screw (2 on a SWEETHEART 4 on OVAL). Tighten nuts to
a snug fit. To prevent chipping do not overtighten or use power tools.
Screwdriver
Machine screw
Remove machine screws
from the top (2 each side)