Heartland 2603 Stove User Manual


 
5
GAS STOVES ONLY
STOVE
TOP
Gasket - Peel off backing
and stick on.
Bracket
(WOOD STOVES SEE NEXT PAGE)
Sheet metaI
screw (black)
Steel Washer Nut Machine screw
(Nickel Plated)
-Remember when working with the cabinet, the cabinet is top heavy. Use your hand to support it during
installation.
-Place box on the floor close to stove. (See Fig. 1 Page 2).
-With a helper,lift cabinet assembly from box by area that is circled.(See Fig.1 Page 2).
-Rest the cabinet assembly on the carton,while your helper steadies the cabinet,peel the cabinet backing off the
gasket and stick one on each bracket.
-Place cabinet assembly onto stove body.(See diagram above)
-Line up holes in the bottom (foot) of the bracket with the holes in the stove top,while one person supports the
cabinet, fasten the cabinet brackets to the stove top with machine screws and nuts.
-To fasten the splashback to the rear of stove, with the Model 7200 use 5 sheet metal screws and washers.
For Model 9200 use 4 sheet metal screws and washers. To prevent chipping do not overtighten or use
power tools.
Gasket
Nut
Machine screw
Steel washer
Sheet metal
screw
48" models only-right
brackel front screw
attachment:machine
screw attached to stove
top without use of nut.