Filter
Top Products
Heat & Glo • SL-550 / 750 / 950TV-IPI-E • 2119-900 Rev. H • 11/0834
E. Lava Rock, Mineral Wool/Ember Placement
Placing the Lava Rock
See Section 14.F for Lava Rock placement instructions.
WARNING! Risk of Explosion! Follow ember placement
instructions in manual. DO NOT place embers directly over
burner ports. Replace ember material annually. Improperly
placed embers interfere with proper burner operation.
Ember material is shipped with this gas appliance. To place
the ember material:
• Embers CANNOT be placed directly over ports. See
Figure 14.4 for the only exception to this guideline. Care
should be taken not to cover the lighting trail of ports
(from back to front).
• When placing Glowing Embers
®
onto the burner care
should be taken so that the ports are not covered. Place
the dime-size ember pieces near the port holes in the
burner top (see Figure 14.3). Failure to follow this pro-
cedure will likely cause lighting and sooting problems.
• Some of the small port holes should be covered with
ember material. See Figure 14.4 for detail.
• Save the remaining ember materials for use during appli-
ance servicing. The embers provided should be enough
for 3 to 5 applications.
Figure 14.3 Placement of Embers
LOG
NO EMBERS
PORT HOLES IN CIRCLED AREA
SHOULD BE COVERED WITH
EMBER MATERIAL. NO OTHER
PORT HOLES MAY COME INTO
CONTACT WITH EMBER
MATERIAL.
Figure 14. 4