Heatilator • SILHOUETTE Series Electric Fireplace • 4030-780 Rev F • 10/06
14
7
7
Heater Setup
A. Remove Shipping Materials
• Cut and discard the ties bundling the fi rescreen.
• Remove screws holding ember bed shipping tabs in
place.
• Remove the tabs and discard. Replace the screws.
• Remove the grate from the shipping pack and slide into
place. See Figure 2
• Remove the upper louver assembly from the pack and
slide notches over screws in column. See Figure 3.
• Remove the lower louver assembly from the pack and
install as shown in Figure 4.
Figure 7.1 Shipping Pack
Figure 7.2 Grate In
Figure 7.3 Upper Louver Assembly
Figure 7.4 Lower Louver Assembly