Harman Stove Company SF 250 Stove User Manual


 
4
ASSEMBLY
Firebrick Diagram
Blower
The blower slides into the channel bracket on the rear
of the stove as shown at right. Plug the blower into a
properly grounded receptacle.
Shaker Handle
The shaker handle installs onto the shaker handle
mount using the two hex-bolts and washers provided.
Firebricks
The SF250 uses 14 “standard” rebricks, as shown
below. These standard rebricks measure 9” X 4½”
X 1¼” each. The rebricks are already installed in
the stove but can be removed to lighten the stove for
moving. The doors can also be removed by simply lift-
ing them off of the hinges.