Filter
Top Products
SKU 98319 For technical questions, please call 1-800-444-3353. Page 4
• Avoid operating alone.
• Properly maintain and inspect to
avoid electrical shock.
The warnings, precautions, and in-6.
structions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SPECIFICATIONS
Product
Appli-
cations
Designed to provide back-up power for radio,
LED lights, alarm, and mobile phone charging
functions.
Power
Source
Dynamo Charger
3.6VDC 120mAh Lithium Battery
Light
Source
3 Light Emitting Diodes (LED’S)
Radio
Run Time
1 Minute Crank Time = 5-10 Minutes Radio Run
Time
Light On
Duration
1 Minute Crank Time = 3 LED’s for More Than 30
Minutes.
1 Minute Crank Time = 1 LED for More Than
1-1/2 Hours.
Mobile
Phone
Power
Duration
1 Minute Crank Time = 2-8 Minutes Talk Time /
40-50 Minutes Standby.
Alarm
Loudness
97 dB @ 12 Inches
Accesso-
ries
Mobile Phone Charger Cord and Adapter
(3.5mm O.D. / 1.1mm I.D.)
UNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Note: For additional information
regarding the parts listed in the following
pages, refer to the Assembly Diagram near
the end of this manual.
Product Features
FIGURE A
VOLUME
CONTROL
(14)
FREQUENCY
SWITCH
(15)
AM
FM
ALARM
OFF
1
LED
3
LED’S
MOBILE PHONE
CHARGER CORD
(28)
DC COVER
(17)
(CHARGER
JACK
INSIDE)
MOBILE PHONE
CHARGER CORD
ADAPTER (29)