Filter
Top Products
Page 2 For technical questions, please call 1-800-444-3353. SKU 9576,
94639
SAVE THIS MANUAL
Keep this manual for the safety warnings
and precautions, assembly, operating,
inspection, maintenance and cleaning
procedures. Write the product’s serial number
in the back of the manual near the assembly
diagram (or month and year of purchase if
product has no number). Keep this manual
and the receipt in a safe and dry place for
future reference.
IMPORTANT SAFETY
INFORMATION
In this manual, on the labeling, and
all other information provided with
this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible
injury or death.
DANGER indicates a
hazardous situation
which, if not avoided, will result
in death or serious injury.
WARNING indicates a
hazardous situation
which, if not avoided, could
result in death or serious injury.
CAUTION, used with
the safety alert
symbol, indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.
NOTICE is used to
address practices not
related to personal injury.
CAUTION, without the
safety alert symbol, is
used to address practices not
related to personal injury.
General Safety Warnings
WARNING Read all safety warnings
and instructions. Failure to follow the
warnings and instructions may result
in electric shock, re and/or serious
injury.
Save all warnings and instructions
for future reference.
Keep work area clean and dry. Cluttered, 1.
damp, or wet work areas invite injuries.
Keep children away from work area. Do 2.
not allow children to handle this product.
Store idle equipment. When not in use, 3.
tools and equipment should be stored in
a dry location to inhibit rust. Always lock
up tools and equipment, and keep out of
reach of children.
Do not use this product if under the 4.
warning labels on prescriptions to
are impaired while taking drugs. If there
is any doubt, do not attempt to use this
product.
Wear eye protection. Wear ANSI 5.
approved safety impact eye goggles
when assembling this product.
Dress safely. Do not wear loose clothing 6.
or jewelry, as they can become caught
in moving parts. Wear a protective
hair covering to prevent long hair from
becoming caught in moving parts. If
REV 06g; 07i