Filter
Top Products
SKU 91393 PAGE 8
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on
page 12 are included. If any parts are missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this manual as soon as possible.
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: For additional information regarding the parts listed in the following pages, refer
to the
Assembly Diagram on page 13.
CAUTION: Always make sure the Power Cord of the Air Filtration System is unplugged
from its electrical outlet
prior
to making any adjustments to the product.
Note: If placing this Air Filtration System on a table or shelf, make sure that the
machine is placed securely on a flat, level surface, capable of supporting the
weight of the machine.
Note: If attaching the Air Filtration System to a ceiling, make sure the machine is
attached securely to joists capable of supporting the weight of the machine.
1. Locate the desired ceiling location and ceiling joists, upon which to attach the Air
Filtration System.
2. With assistance or lifting equipment (not included), raise the unit to the desired
location. Caution: Make sure other people or pets are well clear of the area during
this procedure.
3. Align the four Hangers (32) (see the
Assembly Drawing
on page 13) with the ceiling
joists and measure for hook bolt location. Insert four hook bolts (not included)
through the ceiling into the underside of the ceiling joists.
Note: The hook bolts must be capable of supporting the weight of the Air Filtration
System, and be of compatible size with the Hangers (32). When hanging the
unit, make sure each Hanger (32) fits completely over the end of each hook bolt to
ensure a safe mounting of the Air Filtration System.