Filter
Top Products
SKU 90178 PAGE 10
Flat Washers (part #10), four Spring Washers (part #9), and four Nuts (part #50)
to secure the two Mixing Blades to the inside Drum assembly. (See Figure G.)
MIXING
BLADE
(#46)
MOUNT WITH
V-SHAPED BENDS
POINTING TO LEFT.
DRUM ASSEMBLY
(#44, #47)
FIGURE G
11. Insert the Fixing Plate (part #18) onto the Shaft (part #35).
(See Figure I, next page.)
12. Insert the Inner Cover (part #23) onto the Shaft (part #35).
(See Figure J, next page.)
13. Align the mounting holes in the Inner Cover (part #23), Fixing Plate (part #18),
and Iron Tube Fixture (part #30). Then secure the Inner Cover and Fixing Plate
to the Iron Tube Fixture, using the hardware shown in Figure K.
(See Figure H & K)
10. Locate the Iron Tube Fixture (part #30) and Shaft (part #35) on the left side of the
Cement Mixer. (See Figure H.)
FIGURE H
IRON TUBE
FIXTURE
(#30)
SHAFT
(#35)