Filter
Top Products
Page 2 For technical questions, please call 1-800-444-3353. SKU 68372 - 68396
Before start-up:
The pump can be connected to any shock-proof plug
which has been installed according to regulations.
The plug must have a supply voltage of 120 V~ at 60 Hz.
CAUTION:
This pump has been evaluated for use with clear water
only. Do not use in or around swimming pools.
WARNING:
IMPORTANT! For your own safety – before
starting to run the pump, please have the
following items checked by an expert:
1. To reduce the risk of electric shock, use
only on portable self-contained fountains
no larger than 5 feet in any dimension.
2. Risk of electric shock – This pump is supplied with a
grounding conductor and grounding-type attachment
plug. To reduce the risk of electric shock, connect only
to a properly grounded, grounding-type receptacle.
3. Risk of electric shock – This pump has not been
investigated for use in swimming pool areas.
4. The electrical connections must be
protected from moisture.
5. If there is danger of ooding, the electrical
connections must be taken to higher ground.
6. Circulation of caustic uids, as well as the circulation
of abrasive materials, must be avoided at all costs.
7. The pump must be protected from frost.
8. The pump must be protected from running dry.
9. Access by children should also be
prevented with appropriate measures.
10. To avoid the possibility of the pump plug or receptacle
getting wet, position pump to one side of a wall
mounted receptacle to prevent water from dripping
onto the receptacle or plug. The user should arrange
a “drip loop” in the cord connecting the pump to a
receptacle. The “drip loop” is that part of the cord
below the level of the receptacle, or the connector if an
extension cord is used, to prevent water traveling along
the cord and coming in contact with the receptacle.
11. WARNING: Handling the Power Cord on this product
will expose you to lead, a chemical known to the State
of California to cause cancer, and birth defects or
other reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5, et seq.)
12. The warnings, precautions, and instructions discussed
in this instruction manual cannot cover all possible
conditions and situations that may occur. It must
be understood by the operator that common sense
and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Fluid Type
The Pump is designed for use with salt and fresh
water with a maximum temperature of 77° F (25°C).
Do not use in hot water. Do not use the pump for other
uids, especially not fuels, cleaning uids, or other
chemical products.
Specications
Description Item # 68372 Item # 68389 Item # 68393 Item # 68395 Item # 68396
Electrical Input 120 V~ / 60 Hz
Amps .195 A .07 A .58 A .23 A .14 A
Max. Flow Rate 200 GPH 92 GPH 620 GPH 264 GPH 158 GPH
Max. Head Lift 4.6 FT. 2.3 FT. 11.5 FT. 4.6 FT. 3.6 FT.
Outlet Size .53 IN. .5 IN. .56 IN. .5 IN. .56 IN.
Cord Length 6 FT.
E197437