Filter
Top Products
SAFETY WARNINGS AND PRECAUTIONS
NOTE: Some parts are listed and shown for
illustration purposes only, and are not available
individually as replacement parts.
Fold
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE
TOOL ONLY. NEI-
THER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR
SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE
PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS
SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND
LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT
OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
PLEASE READ THE FOLLOWING CAREFULLY
1. KEEP PRODUCT USAGE AREA CLEAN. Cluttered
areas invite injuries.
2. KEEP CHILDREN AWAY FROM PRODUCT USAGE
AREA. Do not allow children to handle this product.
3. DO NOT USE THIS PRODUCT IF UNDER THE
INFLUENCE OF ALCOHOL OR DRUGS. Read
warning labels on prescriptions to determine if your
judgement or reflexes are impaired while taking
drugs. If there is any doubt, do not attempt to use
this product.
4. USE EYE PROTECTION. Wear ANSI-approved
safety impact eye goggles. The ANSI-approved
safety impact goggles are available from Harbor
Freight Tools.
5. CHECK FOR DAMAGED PARTS. Before us ing
this product, carefully check that it will operate
properly and perform its intended function. Check
for damaged parts and any other conditions that may
affect its operation. Replace or repair damaged or
worn parts immediately.
6. REPLACEMENT PARTS AND ACCESSORIES.
When servicing, use only identical replacement
parts. Only use accessories intended for use with
this product. Approved accessories are available
from Harbor Freight Tools.
7. MAINTENANCE: Service and maintenance should
be performed regularly by a qualified technician.
8. USE THE RIGHT PRODUCT FOR THE RIGHT
JOB. There are certain applications for which this
product was designed. Do not use a smaller tool to
do the work required by a larger industrial size tool.
Do not use this product for a purpose for which it was
not intended.
9. THE BRASS COMPONENTS OF THIS PRODUCT
CONTAIN LEAD, A CHEMICAL KNOWN TO THE
STATE OF CALIFORNIA TO CAUSE BIRTH
DEFECTS (OR OTHER REPRODUCTIVE HARM).
(California Health & Safety code § 25249.5, et seq.)
SAVE THIS INSTRUCTION SHEET
You will need this instruction sheet for the
Operating, Maintenance Procedures, and
Safety Warnings and Precautions. Keep
your invoice with this instruction sheet. Write
the invoice number on the the front of this
instruction sheet. Keep this instruction sheet
and invoice in a safe and dry place for future
reference.
PARTS LIST / ASSEMBLY DIAGRAM
1
2
3
5
6
18
23
Pressure Adjustment Knob
Sinistral Screw
Sinistral Nut
Pressure Adjustment Mounting
Spring
Body
Air Distributor
Filter Mesh
Filter Mesh Mounting
“O” Ring
Drain Cup
Adjustment Screw
Gasket
Water Valve Drain
Filter Valve Screw
Brass Gasket
Rubber Cover
Rubber Screw
Spring
Rubber Gasket
Pressure Gauge
Mounting Bracket
Retainer Ring
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
PART # DESCRIPTION QTY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
22
4
15
16
17
19
20
21
8
9
7
10
11
12
13
14