Filter
Top Products
Page 3 SKU # 41006 REV 03/04
SPECIAL WARNINGS WHEN USING THIS TRAILER JACK
Using this Jack may create special hazards.
Take particular care to safeguard yourself and those around you.
1. Roll Away. Avoid situations which allow the trailer to roll away on the skid and trailer wheels. If
using the trailer jack on an incline, be sure to chock the wheels. Never leave the trailer unattended while on
the jack if possibility of roll-away exists.
2. Overloading. Never attempt to lift or support loads in excess of the rated strength of this Trailer
Jack. Sudden failure of the Jack may result in serious personal or property injury.
3. Re-position the Trailer Jack before driving. Always re-position the Trailer Jack into a
horizontal position (parallel to the trailer’s tongue) before moving the vehicle and trailer. Make sure the
Locking Pin is in place. Driving with the Trailer Jack in the vertical, down position can cause serious
damage to property.
4. Dollying on uneven surfaces. The Skid on this Jack makes moving your trailer without a vehicle
possible. However, moving the trailer on uneven surfaces can cause potential damage to the Jack or other
property.
5. Not to be used for aircraft purposes.
NOTICE: No list of warnings can be all inclusive. The operator must
supply common sense, and operate this tool in a safe manner.
MAINTENANCE
If you discover any damage, repair or replace any damaged parts before using your Trailer Jack.
1. Keep the Crank mechanism and inner tube lightly greased. Assure that this mechanism functions
smoothly.
2. Check the Tongue Adapter’s mounting weld regularly to assure that it remains solid.
3. Inspect the entire unit for corrosion which may be caused by exposure to saltwater or weather.
Rinse thoroughly and re-lubricate if trailer jack has been immersed in salt water.
4. Keep all moving parts lightly lubricated to prevent corrosion. If corrosion develops, you may paint
exterior parts of the Jack to arrest and prevent further damage.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN
THIS MANUAL AS A REFERENCE TOOL ONLY: NEITHER THE MANUFACTURER NOR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER
THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE
OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT: IN FACT THE
MANUFACTURER A ND/OR DISTRIBUTOR EXPRESSLY STATES THATALL REPAIRS AND
PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS
THERETO.