![](http://pdfasset.owneriq.net/f/05/f059e40c-581b-4e80-8f4f-3d559e751e3e/f059e40c-581b-4e80-8f4f-3d559e751e3e-bg4.png)
• Use the guide to adjust the offset adapters. The rear of
the adapter should be no more than 5 mm (3/16”) in
front of the surface of the finished wall. Make sure that
the adapters are level!
• Position the faucet over the offset adapters. Press firmly
into place. Install and tighten the set screws, using the
enclosed allen wrench.