Filter
Top Products
12
Measure the distance from the rough to the outside
surface of the finished wall (X) (1).
Add 1 3/16” to X. Cut the spout connecting thread so
that it is X + 1 3/16” long (2).
Wrap the spout connecting thread with Teflon tape.
Install the spout connecting thread. Tighten it with an
8 mm Allen wrench.
Install the spout escutcheon and spout (1). Tighten
the spout set screw with a 3 mm Allen wrench (2).
1.
1.
2.
2.