Filter
Top Products
3
Installation
Place the faucet and the sealing ring on the countertop.
From below, install the fiber washer, friction washer and
mounting nut. Tighten the mounting nut and the tension-
ing screws.
Attach the hoses to the supply stops with 3/8” compres-
sion fittings (not included). Use two wrenches, as shown,
to prevent the hoses from twisting or from becoming
loose.
Install the pop-up drain (see page 4).
Turn on the water and check all connections for leaks.
sealing ring
fiber washer
friction washer
mounting nut
tensioning screws