Filter
Top Products
8
Corner Mount Kit 28105XX0
Note: The corner mount kit is
not for use with the 28108XX1
wall outlet adapter.
Position the corner mount against the wall at the
desired location.
Mark the positions of the screw holes.
Put the mount aside.
Drill the holes using a 6 mm bit.
Seal the wall around the anchors
with waterproof sealant.
Failure to seal the wall can lead
to possible water damage.
Install the corner mount with the screws and offset
bushings.
Install the Allrounder (see page 10). Tighten the set
screw.