Filter
Top Products
3
Technical Information
Max. water pressure 147 psi
Recommended water pressure 29 - 72 psi
Test pressure 232 psi
Max. flow rate
showerhead 2.5 gpm
handshower 2.5 gpm
Recommended tools (not included)
grease pencil or other marking tool
level
ruler
2 & 3 mm Allen wrenches
6 mm drill bit
8 mm wrench
Philips screwdriver
waterproof sealant
2 mm
3 mm
6 mm
8 mm
Installation Considerations
This unit does not include a water
supply. Use Hansgrohe model
27458XX3 or another supply that
complies with ASME A112.18.1/CSA
B215.1 including ASME A112.18.3.
dense natural stone
brick
gypsum wallboard/plaster fiberboard
surfaced with tile, marble, or stone
If this product is to be installed on another type
of wall, such as a fiberglass or acrylic shower
enclosure, please contact the manufacturer of
the enclosure for recommendations regarding
suitable mounting hardware, mounting
locations, and reinforcement.
In Massachusetts, the maximum output
temperature of the shower mixing valve can be
no higher than 112ºF.
•
•
•
The installer should be sure that the mounting
location for this product is flat (no projecting
joints or tiles) and that the wall is suitable for
the installation of this product.
The included mounting hardware is suitable for
solid surface walls, such as:
concrete
concrete wallboard
•
•