Filter
Top Products
2
Technical Specification
Hole size in mounting surface
Minimum 1-3/8” Maximum 1-5/8”
Maximum mounting surface depth 1-1/4”
Flow rate 2.2 GPM
Maximum operating pressure 145 PSI
Recommended operating pressure 22 - 72.5 PSI
Recommended hot water temp 120
o
- 140
o
F*
M3 cartridge with Boltic
TM
handle screw
*Some governing bodies require that the water heater be set to 120
o
F or
less. Please know and follow all local codes when setting the temperature
on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends installation by a licensed professional plumber.
• Large differences in pressure between the hot and cold supplies should be balanced.
• The supply hoses on this faucet require supply stops with 3/8” compression fittings (not included).
• This faucet has a high temperature limit stop. It ships from the factory on the maximum setting, but may
be reset to a lower temperature if desired.
Axor Carlton Single Control Lavatory Faucet
17010XX1