Filter
Top Products
4
5
Assembly
1. Flush pipe lines thoroughly.
2. Place the mixer including the sealing washer in
position on the basin.
3. Slip the fixation piece including the washer over
the threaded pin and tighten the nut.
4. Connect the supply pipes to the supply valves:
hot-left; cold-right.
5. Connect the pop-up rod to the pop-up waste
assembly.
Large differences in pressure between the hot and
cold water supply should be balanced.
Operation
The mixer is actuated by pushing the lever head.
Swivel to the left = hot water,
swivel to the rigth = cold water.
Technical Data
Operating pressure: max. 147 psi
Recommended operating press.: 14.7 - 72.5 psi
Test pressure: 232 psi
Hot water temperature: max. 176° F
Recommended hot water temp.: 149° F
Hole size in deck:
Minimum: 1 1/4"
Maximum: 1 5/8"
hot cold