Filter
Top Products
10
Setting the fan speed
Turn the fan speed knob to the
desired setting. To increase the
humidity in a room more quickly, set
the knob to HI. For normal operation,
set the knob to MED. For quiet,
nighttime operation or for a more
gradual increase, set the knob to
Quietmist™.
Setting the electronic humidistat
The electronic humidistat allows you to
set the humidity within a range from
20% to 90%, in 5% increments. The
current room humidity level is displayed
in large numbers, while the desired
humidity level is displayed in smaller
numbers. If the current room humidity
level drops below 20%, the display will
show LO. If it is higher than 90%, HI
will be displayed. Press the ▲ and ▼
buttons to adjust the humidity level. The
humidifier will then turn on automatically
whenever the current room humidity
drops more than 2% below the desired
humidity. Once the desired humidity is
reached, the fan will turn off and the
unit will go into stand-by mode.
Indicator lights
The power on indicator will light to
indicate that the humidifier is on.
1. Fan Speed Knob
2. Humidity Setting Buttons (▲/▼)
3. Power On Indicator – lights when
unit is on
Digital Display
4. Current Room Humidity Percentage
5. Desired Humidity Percentage
Setting the Controls –
3-Speed Humidifier with
Electronic Humidistat
Quietmist
™
For quiet, nighttime operation or
for a more gradual increase in the
humidity level, set the knob to
Quietmist.™
840115700 Ev00.qxd 6/6/03 8:59 AM Page 10