Filter
Top Products
14
If the UV bulb does not light after
installing a new bulb, the starter
should be replaced. See page 3
for replacement parts.
Turn off and unplug air purifier.
Remove the intake grille and filters.
The starter is the small cylinder-shaped
part located behind the filter.
Turn the starter counterclockwise until
it unlocks, then pull it out. To install the
new starter, insert the starter and turn
clockwise. Replace filters and intake
grille.
Replacing the UV Starter
1
2
Starter
840129900 ENv02.qxd 11/1/04 11:03 AM Page 14