Filter
Top Products
97716C (Rev. A - 5/02)
HRFG - ER*A HRFG - SR*A HRFG - SER*A
PAGE 8
PART NO.
PARTS LIST
Drain
Retaining Nut
Strainer
Tailpipe Ferrule
Push Button
Push Button Sleeve
Regulator Holder
Bubbler
Regulator
Setscrew #6-32 x .31"
Scr, #10-24 x 1/2 PH TR HD-Z
Strainer
Push Button - Extension
Bottom Cover Plate-Short
Bottom Cover Plate-Extended
Back Panel HRF-SER
Back Panel HRF-ER
Back Panel HRF-SR
Hex Nut
Insert - Threaded
Bubbler Locknut
Lower Panel HRF-SER
Lower Panel HRF-ER
Union - 3/8" x 1/4"
Union - 3/8"
Tee - 3/8"
Fountain-Galaxy Gray(HRFG-S)
Fountain-Galaxy Gray(HRFG-E)
Fountain-Black(HRFG-S)
Fountain-Black(HRFG-E)
Gasket - Black
Tube Assy - Reg. to Bubbler
Nut - Regulator Mounting
LK464
15005C
40038C
40619C
45662C
45738C
50986C
51544C
61313C
70022C
112627543890
55996C
56087C
27201C
27658C
26839C
26837C
26835C
40045C
75554C
70012C
27026C
26833C
70745C
70870C
70852C
55969C
56053C
56025C
56056C
100322740560
66399C
45736C
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
DESCRIPTION
FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.323.0620
2222 CAMDEN COURT
OAK BROOK, IL 60523
630.574.3500
PRINTED IN U.S.A.
Orifice Assy: Mineral deposits on orifice can cause water flow to spurt or not regulate. Mineral deposits may be
removed from the orifice with a small round file not over 1/8" diameter or small diameter wire.
CAUTION: DO NOT file or cut orifice material.
Stream Regulator: If orifice is free of material deposits, regulate flow as instructions on page 4(Step 9). If replace-
ment is necessary, see parts list for correct regulator part number.
Actuation of Quick Connect Water Fittings: Cooler is provided with lead-free connectors which utilize an o-ring
water seal. To remove tubing from the fitting, relieve water pressure, push in on the gray collar while pulling on the
tubing.(see Fig.4, Page 5) To insert tubing, push tube straight into fitting until it reaches a positive stop,
approximately 3/4".
TROUBLE SHOOTING & MAINTENANCE
ITEM NO.