Filter
Top Products
ASSEMBLE
CURTAINS/TOP
RAIL
2
PREPARE
WINDOW FOR
INSTALLATION
Inspect window track, sash, and sill
for it s ability to suppor t the weight of
air conditioner .
Measure wid th between window
moldings to ensure Inst ant Mount
will fit window frame. Inst ant Mount
models are designed for windows
wide (the detail see page 15)
Inst ant Mount kit supplied with unit
is designed for mounting in most
double-hung windows without
storm windows. For inst allation in
window frame with storm window ,
modify sill by adding wood strip s(not
to
inner and outer sills. This
raises
storm window frame.
3
Mobile home window installation
Add wood strip (at least 1 1/2" wide)
along entire wid th of window sill.
Thickness of wood strip should match
height of front lip on window frame.
Fasten wood strip to sill with a
minimum of three countersunk wood
screws (not supplied with kit). This
provides a smooth sur face for
mounting air conditioner .
Storm window installation
If storm window frame does not allow
adequate clearance below sill (1/2"
required), remove storm window
frame or create clearance by adding a
wood strip (at least 1 1/2" wide) along
entire wid th of sill. Fasten wood strip
to sill with at least three countersunk
wood screws (not supplied with kit).
This provides a smooth sur face for
mounting air conditioner .
SI LL
W ood
Str i p
1/2"
Min i mum
O
U
T
D
O
O
R
St orm Wi ndo w
Fram e
1 1/2"
Min imum
I
N
D
O
O
R
1 1/ 2"
Minimum
W ood
St rip
I
N
D
O
O
R
O
U
T
D
O
O
R
Window
Frame
Mus t be a mini mum
of 1/2" to cl ear
botto m rail on unit
included)
unit and eliminates inter ference
of
Inst all top rail with four screws.
13/32"
Slide lef t-hand cur tain assembly
into lef t end of top and bottom
rails. Repeat for right-hand cur tain
assembly . Fasten cur tain ret ainer
strip s to sides of outer case with
six13/32" screws.