Filter
Top Products
USING THE REMOTE CONTROL cont.
TO SET TIMER TO TURN ON THE AIR CONDITIONER, CHANGING THE PREVIOUS
SETTINGS:
1. Turn on the air conditioner.
2. Adjust the mode to Fan, Energy Save, Cool or Dehum.
3. roF Fan or Dehum mode,adjust the fan speed to High,Med or Low. For Cool or Energy Save
mode,adjust the fan speed to High,Med, Low or Auto Cool.
4. Adjust the temperature between 61°F and 86°F (16°C and 30°C).
NOTE: In Fan mode, the temperature cannot be set.
5. rP ess TIMER. Timer On indicator light on the air conditioner control panel will flash. Display will
show remaining hours before the air conditioner will turn on.
6. rP ess the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24
hours.
7. Timer On indicator light on the air conditioner control panel will remain on.
TO CLEAR TIMER DELAY PROGRAM:
NOTE: Air conditioner can be either on or off.
Press TIMER until Timer indicator light turns off.
TO SEE OR CHANGE THE REMAINING TIME (IN HOURS):
TIMER OFF:
1. rP ess the TEMP/TIME up or down arrow button to increase or decrease the time.
2. retfA 5 seconds, the display on the air conditioner control panel will show the remaining time to
Timer Off.
TIMER ON:
1. Display on the air conditioner control panel will show remaining time.
2. rP ess the TEMP/TIME up or down arrow button to increase or decrease the time.
USING YOUR AIR CONDITIONER PAGE 19
ENGLISH
NOTE:In Dehum mode,when the set temperature is close to the ambient temperature,the
compressor may stop and the fan will run in low speed only.