Filter
Top Products
Do not obstruct or cover the ventilation
grille of the air conditoner.Do not put fingers
or any other things into the inlet/outlet and
swing louver.
Do not allow children to play with the air
conditioner.In no case should children be
allowed to sit on the outdoor unit.
The refrigerating circuit is leak-proof.
1.Applicable ambient temperature range:
Cooling
Indoor
Maximum:D.B/W.B
Maximum:D.B/W.B
Minimum:D.B
Maximum:D.B
Minimum:D.B
Minimum:D.B/W.B
Maximum:D.B/W.B
Minimum:D.B/W.B
Outdoor
Indoor
Outdoor
Heating
Specifications
The machine is adaptive in following
situation
10.The power plug and connecting cable
must have acquired the local attestation.
2. If the power supply cord is damaged, it
must be replaced by the manufacturer
or its service agent or a similar qualified
person.
3. If the fuse of indoor unit on PC board is
broken,please change it with the type of
T. 3.15A/ 250V.
4. The wiring method should be in line with
the local wiring standard.
5. After installation, the power plug should
be easily reached.
6. The waste battery should be disposed
properly.
7. The appliance is not intended for use
by young children or infirm persons
without supervision.
8. Young children should be supervised
to ensure that they do not play with
the applience.
9.Please employ the proper power plug,
which fit into the power supply cord.
Cautions
32
o
C/23
o
C
24
o
C/18
o
C
-7
o
C/-8
o
C
43
o
C/26
o
C
18
o
C
27
o
C
15
o
C
18
o
C/14
o
C
2
Outdoor
Maximum:D.B/W.B
Minimum:D.B/W.B
24
o
C/18
o
C
-15
o
C
(INVERTER)
11.For the unit H2SM-18HS03/R2
Through poor conditions of the electrical
MAINS, shortly voltage drops can appear
when starting the EQUIPMENT.This can
influence other equipment (eg. Blinking
of a lamp). If the MAINS-IMPEDANCE
Zmax<0.325 OHM, such disturbances
are not expected. (In case of need, you
may contact your local supply authority
for further information.)
12.For the unit HSU-18RS03/R2
Through poor conditions of the electrical
MAINS, shortly voltage drops can appear
when starting the EQUIPMENT.This can
influence other equipment (eg. Blinking
of a lamp). If the MAINS-IMPEDANCE
Zmax<1.088 OHM, such disturbances
are not expected. (In case of need, you
may contact your local supply authority
for further information.)
13.For the unit HSU-22RS03/R2
Through poor conditions of the electrical
MAINS, shortly voltage drops can appear
when starting the EQUIPMENT.This can
influence other equipment (eg. Blinking
of a lamp). If the MAINS-IMPEDANCE
Zmax<0.094 OHM, such disturbances
are not expected. (In case of need, you
may contact your local supply authority
for further information.)