Haier HSU-18LEK03/R2(DB) Air Conditioner User Manual


 
Operation
Sleep Operation
If the wind speed is high or middle before setting for the
sleep, set for lowing the wind speed after sleeping.
If it is low wind, no change.
4.Set the wind speed change when sleeping
Operation Mode
1. In COOL,DRY mode
SLEEP operation starts SLEEP operation stops
Approx.6hrs
1 hr
Rises 1
O
C
Rises 1
O
C
Temp.setting
Unit stop
In COOL, DRY mode
1 hr
2.
In AUTO mode
3. In FAN mode
It has no SLEEP function.
Note
When TIMER function is set, the sleeping function can’t be
set up .After the sleeping function is set u
p
,
TIMER function, the sleeping function will be cancelled; the
machine will be in the state of
timing-on.
TURBO /QUIET Operation
1 hours after SLEEP mode starts,temp.will become
higher than temp.setting.After another 1 hours,temp.rises
by 1 futher.The unit will run for further
6 hours then stops
T
emp. is higher than temp.setting so that room temperature
won’t be too low for your sleep.
The unit operaters in corresponding sleep mode
adapted to the automatically selected operation
mode.
O
C
1
O
C
if user resets
Before going to bed,you can simply press the SLEEP
button and unit will operate in SLEEP mode and bring
you a sound sleep.
TURBO
/QUIET
TURBO
/QUIET
Press the
TURBO
/QUIET
cancel
TURBO
QUIET
When you need fast cool or fast dehumidification,you can
choose the Turob function; when you sleep, read, you can
choose Quiet function
bu on, you can switch the “Turbo” and “Quiet”
will swith as below
When running in Turbothe fan speed is the highest,
when running in Quiet, the fan speed is super slow
4
HEALTH Operation
Nano-Aqua generator adopt two high voltage
pole to ionize the water molecule into
nanometer water ion,and release these ions
to the air to kill the bacterium and refresh
the air. as well as the nanometer water inon
can be easily absorbed by skin,keeping moisture
anytime.