Filter
Top Products
(7)
English
Your window kit has been designed to fit most standard vertical and horizontal window applications.
However, it may be necessary for you to improvise/modify some aspects of the installation procedures for
certain type windows. Please refer to for minimum and maximum window openings.
Note: Window kit is just available for some models.
Installation Instruction
• Air outlet intake indoor side can not be blocked by curtains, or something alike.
• The end of air hose cannot be blocked by shutters or something alike.
• Do not bend the air hose when assembling, keep it straight.
• When appliance in cool or dry mode, condensate will concentrate in water box of chassis. When the
box is full, water full indicator glitters (red), LCD window appears the error sign E. The appliance will
stop running at the same time. Now the power supply should be shut, then pull out the rubber plug in
drain port underside the appliance, drain the water into a prepared container, or drain the water by
moving the appliance to a suitable place.
Note: Water should be drained out when the water full light is on. Otherwise, the appliance will
not work.
• Select the Best Location where there is beside the window, the door or the French window.
• Keep the required distance from the return air outlet to the wall or other obstacles at least 20”.
• Fix one end of the air hose on the air intake or outlet underside the appliance.
• Extend the air hose to insure another end of the air hose be taken in the clearance between
window, door, or French window, or wall hole.
• Air outlet or intake can not be blocked by protective grid or something alike.
• The distance between two ends of the air hose should be kept at 8” at least.
Note: The cooling capacity will decrease when using a single air hose.
Fig. 3