Filter
Top Products
INSTALLATION MANUAL FOR WIRE CONTROLLER
20
1. Remove upper part of wire controller
Remove upper part of wire controller by press.
2. Install wire controller
(1) For exposed installation,
use 2 wood screws (accessory).
(2) For recessed installation,
use 2 wood screws (accessory).
Note
Try as far as possible a flat surface for installation. Don't use excessive
force when tightening screws, or lower part might got deformed.
PCB is mounted on lower part of wire
controller, be careful not to damage it.
Lower part of wire
controller
Upper part of wire
controller