Filter
Top Products
USING THE REMOTE CONTROL cont.
ENGLISH
To set the air conditioner to turn on between 1 hour and 24 hours:
1. Press the TIMER ON/OFF button. Timer ON indicator light on the air conditioner control panel
will illuminate.
2. Press the TIMER UP or TIMER DOWN arrow button to change the delay time from 1 hour to 24
hours.
3. The buzzer beeps twice after 5 seconds, then Timer ON countdown will initiate.
TO CLEAR TIMER DELAY PROGRAM:
NOTE: Air conditioner can be either on or off.
Press TIMER ON/OFF button until Timer indicator light turns off.
TEMP UP / TEMP DOWN
• Press the TEMP UP button to raise the temperature. Each time you press the TEMP UP button,
the temperature will go up 1°F until it reaches 86°F (30°C).
• Press the TEMP DOWN button to lower the temperature. Each time you press the TEMP DOWN
button, the temperature will go down 1°F until it reaches 61°F (16°C).
SLEEP
1. Press the SLEEP button to choose Sleep mode. This display will show (08) and the indicator
light will turn on.
2. The temperature will increase by 2F˚ 1 hour after the mode is chosen. The temperature then
increases another 2F after 1 hour. The unit will hold this temperature for 6 hours then stops.
3. To turn off Sleep mode, press the SLEEP button until the indicator light is off.
FAHRENHEIT / CELCIUS
1. Press the F/C button to choose between Farenheit and Celcius.
LOCK
1. Press the LOCK button on the remote to disable button functionality. Press the lock button
again to activate the remote control functionality.
LIGHT
1. When you press the LIGHT button, the display on the unit will turn off, but the unit is still
operating normally. When you press the LIGHT button again or press any button on the remote
control, the display will be illuminate again.
RESET
1. Press the reset button to reset the unit to factory settings.
USING YOUR AIR CONDITIONER PAGE 19